CELmar0 Marine Land Based VHF Stainless Steel Whip

£50.00 ex. VAT

1.0m Marine & Land-Based Stainless Steel VHF Antenna

CELmar0 Marine VHF Antenna from AC Antennas is a compact 1.0m stainless steel whip antenna designed for marine and land-based VHF communication systems. Covering the marine VHF band from 156–162.5 MHz, it provides reliable omnidirectional performance with 0 dBd (3 Marine dB) gain, 100W power handling and a rugged stainless steel construction suitable for demanding environments.

1.0m Stainless Steel
Whip Antenna
156–162.5 MHz
Marine VHF Coverage
0 dBd
3 Marine dB Gain
100W
Maximum Power
Omnidirectional
360° Coverage
UHF Female
Connector
5/8″-24 TPI
Male Thread
IP66 Rated
Weather Protection
200 km/h
Wind Survival
Marine Grade
Stainless Steel Construction

The CELmar0 Marine VHF Antenna is suitable for yachts, powerboats, workboats, harbour installations, marina communications and land-based VHF systems where a compact stainless steel whip antenna is required. The antenna is supplied without a mount and is designed for use with compatible 5/8″-24 TPI mounting hardware.

In stock

Description

CELmar0 Marine VHF Antenna

Compact stainless steel VHF whip antenna for marine and land-based communication systems. Designed for 156–162.5 MHz operation with 0 dBd gain, 100W power handling, omnidirectional coverage, UHF female connector and rugged IP66 marine protection.

The CELmar0 Marine VHF Antenna from AC Antennas is a compact 1.0m stainless steel whip antenna designed for reliable marine VHF communications on leisure craft, workboats, fishing vessels, harbour systems and land-based VHF installations.

CELmar0 Marine VHF Antenna by AC Antennas with 0 dBd gain, 1.0m stainless steel whip construction and UHF female connector

CELmar0 Marine VHF Antenna for Boats, Workboats and Shore Systems

Covering the international marine VHF band from 156.0–162.5 MHz, the CELmar0 provides dependable transmission and reception performance in a lightweight, corrosion-resistant stainless steel design. It is suitable for marine and land-based systems where a compact whip antenna is preferred over a larger fibreglass antenna.

1.0m Stainless Steel

Compact marine VHF whip antenna.

156–162.5 MHz

Marine VHF frequency coverage.

0 dBd Gain

3 Marine dB omnidirectional performance.

100W Rated

Suitable for VHF Tx/Rx installations.

UHF Female

Connector fitted at the antenna base.

5/8″-24 TPI

Male mounting thread. No mount included.

IP66 Rated

Weather-resistant marine construction.

200 km/h Wind Survival

Built for exposed marine conditions.

Why Choose the CELmar0?

The CELmar0 is the compact stainless steel whip option within the CELmar marine VHF antenna range. Its low weight, corrosion-resistant construction and omnidirectional pattern make it a practical choice for small vessels, workboats, marina systems and shore-based VHF installations requiring a simple and robust antenna solution.

Suitable Applications

  • Leisure boats and yachts
  • Powerboats and day boats
  • Fishing vessels and workboats
  • Harbour craft and support vessels
  • Marina and harbour communication systems
  • Land-based VHF installations
  • Port authority and shore station communications

Technical Specifications

ManufacturerAC Antennas
ModelCELmar0
Product Number100057-P
Product GroupVHF
DesignWhip
PatternOmnidirectional
Frequency Range156.0–162.5 MHz
Bandwidth6.5 MHz
Nominal Impedance50 Ohm
Maximum Input Power100W
Gain0 dBd / 2.15 dBi / 3 Marine dB
VSWR<1.5:1
PolarisationVertical
DC ShortedNo
DC GroundedYes
ConnectorUHF Female
Length1.00m
Sections1
Weight0.15kg / 0.33lbs
Survival Wind Speed200 km/h / 55 m/s / 124 mph
Wind Area0.0028m² / 0.0302ft²
Wind Load @ 160km/h4N
MaterialStainless Steel
ColourSteel Grey
Operating Temperature-55°C to +60°C
Ingress ProtectionIP66
Thread5/8″-24 TPI male
MountingNo mount included

Mounting and Installation

The CELmar0 uses a 5/8″-24 TPI male thread and is supplied without a mounting bracket. This allows installers to select the most suitable mount for the vessel, rail, mast, bracket or shore-based installation.

For best VHF performance, mount the antenna as high and as clear as practical. Keep the antenna away from radar scanners, large metal structures, other antennas and sharp cable bends where possible.

For more installation guidance, see our Marine VHF Antenna Mounting Guide, Marine Antenna Thread Sizes Guide and Marine Antenna Mount Compatibility Guide.

VHF Antenna Height and Range

Although the CELmar0 is compact, marine VHF communication still depends heavily on line of sight. A higher and clearer mounting position will normally improve communication range and signal reliability.

VHF antenna height versus range comparison showing masthead, hardtop, console and deck mounting positions on boats

For more detail, read our guides on VHF Antenna Height vs Range and Marine VHF Antenna Range.

Cable and Connector Guidance

The CELmar0 is fitted with a UHF female connector. Coaxial cable is not listed as supplied with this model, so cable type and connector selection should be matched to the radio, mounting location and cable run length.

For help choosing cable for a VHF installation, see our Marine VHF Antenna Cable Guide.

Downloads and Manufacturer Information

Download CELmar0 Datasheet (PDF)

Additional manufacturer information is available from AC Antennas.

Related CELmar VHF Antennas

Related VHF Guides

CELmar0 Marine VHF Antenna FAQs

What frequency does the CELmar0 Marine VHF Antenna cover?

The CELmar0 covers the marine VHF frequency range of 156.0–162.5 MHz.

What is the CELmar0 antenna made from?

The CELmar0 is made from stainless steel and has a steel grey finish.

What connector does the CELmar0 use?

The CELmar0 uses a UHF female connector.

Does the CELmar0 include a mount?

No. The CELmar0 is supplied without a mount and uses a 5/8″-24 TPI male thread.

How long is the CELmar0 antenna?

The CELmar0 is 1.00m long.

Is the CELmar0 suitable for saltwater environments?

Yes. The CELmar0 uses stainless steel construction with IP66 protection and is designed for marine and land-based environments.

Is the CELmar0 suitable for workboats?

Yes. Its compact stainless steel whip design, 100W power handling and omnidirectional coverage make it suitable for workboats, harbour craft and support vessels.

The CELmar0 Marine VHF Antenna is a practical compact option where a stainless steel VHF whip antenna is required for marine, harbour or land-based communication systems.

Additional information

Weight1000 g
Dimensions1000 × 100 × 100 mm
Application

Frequency Band

VHF

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.