Description
Compact 1.04m Fibreglass VHF Antenna for Small Boats, RIBs and Workboats
CELmar2-1 Marine VHF Antenna from AC Antennas is a compact 1.04m fibreglass VHF antenna designed for sailboats, leisure craft, RIBs, pilot boats and workboats where installation space is limited. Operating across the marine VHF frequency range of 156–162.5 MHz, the antenna provides reliable omnidirectional communications with 0 dBd / 3 Marine dB gain and a maximum input power rating of 100W.
Manufactured using premium marine-grade materials, the CELmar2-1 features a rugged coaxial dipole design with copper radiating elements, crimped construction technology, IP66 environmental protection, a pre-installed 6m RG58 coaxial cable and a standard 1″-14 TPI female ferrule for compatibility with common marine antenna mounts.
Marine VHF Antenna
3 Marine dB Gain
Marine VHF Coverage
Maximum Input Power
Radiation Pattern
Cable Supplied
Female Ferrule
Marine Protection
Rugged Crimped Construction
Small Boats, RIBs, Sailboats & Workboats
The CELmar2-1 Marine VHF Antenna is a strong choice for compact marine installations where reliable VHF communication, low weight and straightforward installation are more important than maximum antenna height.
CELmar2-1 Marine VHF Antenna is designed for compact marine installations where dependable VHF communication is required but available mounting space is limited. Its short 1.04m fibreglass body makes it well suited to small vessels, RIBs, wheelhouse roofs, rails and practical workboat installations.

CELmar2-1 Marine VHF Antenna for Compact Boat Installations
The CELmar2-1 Marine VHF Antenna sits at the compact end of the CELmar range. Compared with longer VHF antennas, it is easier to position on smaller vessels and installations where antenna height, access, roof clearance or deck layout restrict available mounting options.
This makes it suitable for:
- Small leisure craft
- RIBs and tenders
- Pilot boats and harbour craft
- Workboats with limited mounting space
- Sailboats needing a compact VHF antenna
- Wheelhouse roof and rail-mounted installations
Key Features
- AC Antennas CELmar2-1 marine and land-based VHF antenna
- 0 dBd / 2.15 dBi / 3 Marine dB gain
- 156.0–162.5 MHz VHF frequency range
- 100W maximum input power
- Omnidirectional radiation pattern
- 1.04m white fibreglass construction
- Pre-installed 6m RG58 coaxial cable
- 1″-14 TPI female ferrule
- IP66 ingress protection
- 200 km/h survival wind speed
- Copper radiating elements
- Crimped construction technology for increased mechanical strength
Technical Specifications
The CELmar2-1 Marine VHF Antenna combines compact 1.04m dimensions, fibreglass construction and omnidirectional VHF coverage for reliable communication on smaller vessels and space-restricted installations.
| Manufacturer | AC Antennas |
|---|---|
| Model | CELmar2-1 |
| Product Number | 100005-P |
| Product Group | VHF |
| Design | Coaxial dipole |
| Pattern | Omnidirectional |
| Frequency Range | 156.0–162.5 MHz |
| Bandwidth | 6.5 MHz |
| Nominal Impedance | 50 Ohm |
| Maximum Input Power | 100W |
| Gain | 0 dBd / 2.15 dBi / 3 Marine dB |
| VSWR | <1.5:1 |
| Polarisation | Vertical |
| DC Shorted | No |
| DC Grounded | No |
| Cable | 6m / 20ft RG58 cable supplied |
| Length | 1.04m / 3.40ft |
| Sections | 1 |
| Weight | 0.60kg / 1.35lbs |
| Survival Wind Speed | 200 km/h / 55 m/s / 124 mph |
| Wind Area | 0.0193m² / 0.2078ft² |
| Wind Load @ 160km/h | 28N |
| Material | Fibreglass |
| Colour | White |
| Ingress Protection | IP66 |
| Thread | 1″-14 TPI female ferrule |
| Operating Temperature | -40°C to +60°C |
Mounting and Installation
The CELmar2-1 Marine VHF Antenna uses a standard 1″-14 TPI female ferrule, making it suitable for common marine antenna mounts. Its compact 1.04m length makes it practical for smaller vessels, wheelhouse roofs, rails and other locations where a longer antenna may be awkward to install.
Suitable mounting options may include mast mounts, rail mounts, deck mounts and ratchet mounts depending on the vessel layout. For best performance, mount the antenna as high and as clear as practical, away from metal obstructions, radar scanners, other antennas and sharp cable bends.
For installation support, see our Marine VHF Antenna Mounting Guide, Marine Antenna Thread Sizes Guide and Marine Antenna Mount Compatibility Guide.
VHF Range and Antenna Height
The CELmar2-1 is compact and easy to install, but like all marine VHF antennas its real-world range depends heavily on mounting height and line of sight. Installing the antenna as high and as clear as practical will normally improve communication range and reliability.

For more detail, read our guides on VHF Antenna Height vs Range and Marine VHF Antenna Range.
Why Choose a Compact 0 dBd VHF Antenna?
A compact 0 dBd antenna such as the CELmar2-1 produces a broad omnidirectional radiation pattern, which is useful for smaller vessels that move, roll or operate at varying angles. It is not intended to replace a taller high-gain antenna for long-range installations, but it offers a practical solution where compact size and simple installation are priorities.
For a practical comparison of gain options, see our guide: 3dB vs 6dB Marine VHF Antennas.
Cable and Connection Guidance
The CELmar2-1 is supplied with a pre-installed 6m RG58 cable. The datasheet does not specify a fitted radio-end connector, so connector requirements should be checked against the vessel’s VHF radio and installation route before fitting.
For longer cable runs or installations with higher cable loss risk, see our Marine VHF Antenna Cable Guide.
Suitable Vessel Applications
The CELmar2-1 Marine VHF Antenna is a practical choice for compact vessel installations where antenna size, mounting space and ease of installation are important. It is especially useful on smaller craft operating around harbours, estuaries, marinas and coastal waters.
- Small boats requiring a compact VHF antenna
- RIBs and tenders with limited mounting space
- Pilot boats and harbour craft
- Workboats needing a compact communication antenna
- Sailboats requiring a lightweight 1.04m antenna
- Secondary VHF radio installations
Downloads and Manufacturer Information
Download CELmar2-1 Datasheet (PDF)
Additional manufacturer information is available from AC Antennas.
Related Guides
- Marine VHF Antennas Information
- Marine VHF Antenna Range
- VHF Antenna Height vs Range
- 3dB vs 6dB Marine VHF Antennas
- Marine VHF Antenna Cable Guide
- Marine VHF Antenna Mounting Guide
- Marine Antennas Explained
CELmar2-1 Marine VHF Antenna FAQs
Who should choose the CELmar2-1 Marine VHF Antenna?
The CELmar2-1 Marine VHF Antenna is suitable for boat owners who need a compact, lightweight and durable VHF antenna for small boats, RIBs, sailboats, pilot boats or workboats.
How long is the CELmar2-1 antenna?
The antenna is 1.04m long, which is approximately 3.40ft.
What gain does the CELmar2-1 provide?
The CELmar2-1 provides 0 dBd gain, equivalent to 2.15 dBi or 3 Marine dB.
What cable is supplied with the CELmar2-1?
The CELmar2-1 is supplied with 6m / 20ft of RG58 coaxial cable.
What mount thread does the CELmar2-1 use?
The antenna uses a standard 1″-14 TPI female ferrule, making it compatible with many marine antenna mounts using the same thread standard.
Is the CELmar2-1 suitable for RIBs and small boats?
Yes. Its compact 1.04m fibreglass construction and pre-installed 6m RG58 cable make it suitable for RIBs, tenders, small leisure craft and other space-restricted marine installations.
Does antenna height affect VHF range?
Yes. VHF communication is strongly affected by line of sight. Mounting the CELmar2-1 higher and clear of obstructions will generally improve usable communication range.
The CELmar2-1 Marine VHF Antenna is an excellent choice for compact marine installations where a short, lightweight and durable fibreglass VHF antenna is required.















Reviews
There are no reviews yet.