Koden CVS-872D – 12.1-inch Broadband Echo Sounder, 1-3kW

£3,119.00 ex. VAT

Koden CVS-872D 12.1-inch broadband echo sounder supporting 1-3kW RMS output depending on transducer, with up to four selectable operating frequencies within the fitted transducer range.

SKU: CVS-872D Category: Brand:

Description

Koden CVS-872D broadband echo sounder

Koden CVS-872D is a 12.1-inch colour LCD broadband echo sounder supporting 1kW to 3kW RMS output, depending on the transducer fitted. Koden lists a basic range up to 3,000m / 8,000ft and supports selection of up to four operating frequencies within the range of the compatible broadband transducer. F&C Marine can help match the sounder, transducer and installation before supply.

Koden CVS-872D broadband echo sounder

1kW to 3kW output depends on transducer

Koden specifies the CVS-872D for 1kW to 3kW RMS output depending on the selected transducer. The fitted transducer therefore determines both the available transmitter power and the frequency bands that can actually be used. The sounder electronics provide flexible frequency selection, but that does not mean every transducer can operate across the full controller range. Always configure the unit within the limits stated for the transducer installed.

Four selectable broadband frequencies

The CVS-872D can select up to four operating frequencies within the range supported by its broadband transducer, with fine frequency adjustment available in 0.1kHz steps. This allows the installation to be configured for the required fishing or sounding task and can help avoid interference from other sounders. When replacing an existing system, record the exact transducer model and frequency bands before deciding which settings or hardware can be retained.

Transducer and hull installation

Acoustic performance depends on the transducer location and the water flow around it. The transducer needs a clear path into the water and should be kept away from aerated flow and turbulence from hull steps, strakes, thrusters and propellers. Hull material affects the suitable housing and mounting method. On a refit, inspect any existing tank, fairing or through-hull fitting and verify its condition and suitability before reuse.

Power, cabling and bridge integration

The sounder requires a stable vessel electrical supply and correctly rated circuit protection. Protect transducer and data cables from mechanical damage, water and avoidable electrical interference. Do not alter transducer cabling unless the current Koden instructions permit the exact method. If depth, position or other information is exchanged with bridge equipment, identify the required interfaces during planning and verify the data at each receiving device during commissioning.

Commissioning and performance checks

Commissioning should confirm the transducer model, permitted frequency bands, selected output power and stable target or depth presentation. Test the chosen frequencies with other vessel machinery operating and, where practical, underway because turbulence and electrical interference may not appear at the berth. Koden’s basic range figure is a manufacturer specification; actual detection performance depends on the transducer, frequency, target, water conditions, installation and settings.

Documentation and related guidance

See the current Koden CVS-872D manufacturer information. Use the current installation and operation manuals as the final reference for transducer compatibility, output power, frequency selection, wiring and setup. You can also browse F&C Marine echo sounders and transducers and the Marine Electronics Knowledge Base.

Official manuals, datasheets and brochures


Related products


Related technical resources

Before ordering Koden CVS-872D

Send F&C Marine the vessel type, hull material, existing sounder and transducer model, intended operating requirement, photographs and cable-route information. We can then check the 12.1-inch CVS-872D against the correct broadband transducer, applicable 1-3kW output and installation requirements before quotation.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.