Description
Koden KDS-5000BB digital searchlight sonar
Koden KDS-5000BB is a black-box digital searchlight sonar with 1.5kW RMS output at 180kHz. Koden lists a basic range up to 2,000m / 6,000ft and specifies connection to an owner-supplied XGA display. It is a fixed 180kHz digital sonar, not a broadband-frequency model. F&C Marine can help confirm the complete processor, hull-unit, display and installation arrangement before supply.

1.5kW fixed 180kHz sonar
Koden specifies the KDS-5000BB hull-unit transmitter at 1.5kW RMS and 180kHz. The 180kHz frequency is fixed for this model. Koden provides sonar, echo-sounder and bottom-scan presentation modes using the same 180kHz acoustic system. The basic range figure is a manufacturer specification; actual target detection depends on water conditions, target, settings and the quality of the hull-unit installation.
Black-box system and XGA display
The KDS-5000BB is designed as a black-box sonar. Koden specifies connection to an XGA-type display supplied by the owner, allowing the monitor arrangement to be selected for the bridge or wheelhouse. The processor unit and operation unit need suitable mounting, ventilation and service access. Before a refit, record the existing monitor connection, controls, processor location and cable routes so that the replacement arrangement can be planned as a complete system.
Hull unit and underwater installation
The sonar’s performance depends strongly on the hull unit and its installation. Mechanical movement, transducer condition, seals, fouling and cable condition all need consideration. The hull unit must have the clearances and structure required by Koden. On a working vessel, inspect the underwater and mechanical components before deciding which items can be reused, because a new processor will not correct a damaged transducer, worn mechanism or poor hull installation.
Power and cabling
Koden specifies a 21.6 to 31.2VDC supply for the KDS-5000BB processor and hull-unit system. Use suitable circuit protection and cable sizing and keep power and signal wiring protected from water, heat and mechanical damage. Where navigation data is connected to the sonar, identify the source equipment and interface before installation and verify each required input during commissioning.
Commissioning and performance checks
Commissioning should confirm processor-to-operation-unit communication, hull-unit movement, stable 180kHz sonar presentation, display operation and any connected navigation data. Test the sonar with vessel machinery running and, where practical, in realistic operating conditions. Investigate alarms, mechanical issues or unstable acoustic performance before handover. Record the installed processor, hull unit, display, cable routes and settings for future maintenance.
Documentation and related guidance
See the current Koden KDS-5000BB manufacturer information for the latest specifications and manuals. Current Koden documentation should be the final reference for hull-unit installation, wiring, power and commissioning. You can also browse F&C Marine sonar and echo-sounder equipment and our Marine Electronics Knowledge Base.
Official manuals, datasheets and brochures
Related products
- Koden KDS-5500BB – 1.5kW Fixed-Frequency Digital Sonar, 80/140/180kHz
- Koden KDS-6000BB – 1.5kW Broadband Searchlight Sonar, 130-210kHz
Related technical resources
Before ordering Koden KDS-5000BB
Send F&C Marine the vessel type, existing sonar and hull-unit model, photographs, supply information, available display arrangement and intended operating requirement. We can then verify the 1.5kW 180kHz KDS-5000BB configuration and identify the companion equipment and installation work likely to be required.














Reviews
There are no reviews yet.