Description
LXNAV GPSN2K compact NMEA 2000 GPS antenna
LXNAV GPSN2K is a compact NMEA 2000 GPS antenna for supplying position, course over ground, speed over ground and related GNSS data to a compatible vessel network. The unit is designed for straightforward connection to an existing NMEA 2000 backbone and for use as a GPS source for compatible chartplotters and multifunction displays.
Compact marine GPS for NMEA 2000
GPSN2K has a 46 mm diameter housing and connects to the vessel network through a standard 5-pin A-coded M12 NMEA 2000 connector on a 50 cm cable. It is intended for installations where a compact dedicated GPS source is required without adding a separate display unit.
Key technical specifications
- Recommended operating supply voltage: 8–28 V DC
- NMEA 2000 network load: 1 LEN
- NMEA 2000 bit rate: 250 kbps
- Position accuracy: 3 m
- GPS receiver: 66 channels
- Cold start: approximately 35 seconds
- Hot start: approximately 1 second
- Ingress protection: IP66
- Operating temperature: -20°C to +65°C
- Storage temperature: -40°C to +85°C
- Weight: 100 g
- Housing: Ø46 × 15 mm without mounting screw
- Overall height with mounting screw: Ø46 × 31 mm
- Integrated NMEA 2000 cable length: 50 cm
Supported navigation data
The current LXNAV manual lists transmission of GNSS positional data, dilution of precision, satellites in view, course over ground, speed over ground and rapid position updates. Rapid position PGN 129025 is transmitted at 10 Hz, while COG and SOG PGN 129026 is transmitted at 5 Hz.
Mounting position
The antenna should be mounted on a solid surface with a clear view of the sky. LXNAV recommends avoiding locations close to strong RF transmitting antennas where interference could affect GPS performance. The unit is secured through a 16 mm mounting hole using the M16 fixing arrangement, with the base seated firmly against the mounting surface.
NMEA 2000 installation
A working NMEA 2000 network is required. GPSN2K should be connected to a free T-connector on the backbone, with any additional drop cable selected to suit the installation. Existing backbone power, termination and connector condition should be checked before commissioning.
Setting GPSN2K as the position source
After connection, the receiving chartplotter or multifunction display should be configured to use GPSN2K as the appropriate GPS or GNSS data source. On compatible systems, verify that the unit appears in the NMEA 2000 device list and that position, COG and SOG data are being received correctly.
F&C Marine supply and installation support
F&C Marine can supply GPSN2K for new or existing NMEA 2000 installations and can assist with mounting position, backbone layout, cabling, source selection and commissioning. For retrofit work, photographs of the proposed mounting position and existing NMEA 2000 network are useful before finalising the installation.
Official manuals and technical information
Before ordering LXNAV GPSN2K
Send F&C Marine details of the vessel, proposed mounting location, existing NMEA 2000 backbone and the chartplotter or display that will use the GPS data. We can then help confirm the installation arrangement and any additional T-connectors or network cabling required.
Manuals & Downloads
Download the relevant LXNAV documentation hosted by F&C Marine:
Technical guides and installation examples

GPSN2K provides an external NMEA 2000 GPS source for compatible network equipment. The installation example keeps the GPS sensor outside with a clear view of the sky.
















Reviews
There are no reviews yet.